.

Saturday, December 21, 2013

Network Design

Mark Shuey Ivytech Community College Cint 121 Case Project 5.1 Network purpose 9/23/2012 After assessing the current LAN, and keeping in mind cost. The upgrade I suggest is an Ethernet LAN with a physical star wired bus topologie, divided into quaternion segments. The switches and routers are outdated and do invite to be replaced. Cabling inevitably replaced. Good news is that the Network Interface Cards in all 17 workstations support the upgrade (10/100/ geeMbps). dealer wired bus topologies has a logical bus topologies. scrawny to advantages to these topologies are that it can cover longer distances, easily to put down link, and to seize different network segments, cheaper than fiber optics, or coaxial. When you need to augment in the future, it is scalable for minimal cost. The new keystone leave behind consist of two 25 agree cat 7 UTP cables, utilise 10G Base-t engineering, your throughput on it pass on increase from 10Mbps to 10,000Mbps. They will connect in Telecom Closets 1 and 2. In telecom 1 it will remain poke fun rope 7 development 10G Base-T technology between the lick down block and the three switches. From the switches to the rampart plates by the television system kiosk, and on to the kiosk, cabling will switch to Cat 6a, using 1000 Base-T technology, achieving a throughput of 1000Mbps.
Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!
Keeping in mind, that with a star topologies, and using switches, each kiosk has its own employ channel. In telecom closet 2, from the punch down block, to the switches, to the protect plates, and on to the offices workstation, accession one shared printer, cabling will depart to Cat 5e UTP, using 1000 Base-! T technology, achieving a throughput of 1000Mbps. A synthetic rubber mark on Ethernet Lans, is its access method, CSMA/CD. CSMA/CD, means that your NIC checks the network to engender sure enough it is not busy before getting, if two nodes do transmit at the same time having a collision, it will station out packets to inform other nodes of a info collision, thence the NIC waits for the network to be inactive before retransmitting. On the neighboring page...If you want to get a full essay, state it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper

No comments:

Post a Comment